Rotary drilling opportunities to how to solve the problem
Release time:
2018-03-20
Source:
Rotary drilling rig in the use of a lot of unexpected small problems, if as a novice certainly can not be handy to treat, it also needs long-term accumulation and practice. After all, there are many possible problems, such as falling objects, hole collapse, hole body deviation and other problems. Let's look at all possible problems and solutions of small rotary drilling rig manufacturers. When falling objects, they should be fished quickly with fishing forks, hooks, rope sleeves and other tools. If falling objects have been buried by sediment, mud and sand should be removed according to the above-mentioned items, make the fishing tool touch the falling body before fishing. In any case, it is strictly prohibited for construction personnel to enter the casing
Rotary drilling rig in the use of a lot of unexpected small problems, if as a novice certainly can not be handy to treat, it also needs long-term accumulation and practice. After all, there are many possible problems, such as falling objects, hole collapse, hole body deflection, etc. Let's take a look at all possible problems and solutions of small rotary drilling rig manufacturers.
Drop drill
When drilling and falling objects, they should be fished quickly with fishing forks, hooks, rope slings and other tools. If the falling objects have been buried by sediment, the sediment should be removed according to the above-mentioned items, so that the fishing tools can contact the falling objects before fishing.
In any case, it is strictly prohibited for construction personnel to enter the borehole without casing or other protective facilities to deal with the fault. When it is necessary to drill the casing or other protective facilities, check that there is no harmful gas in the hole, and prepare safety facilities such as anti-virus, anti-drowning and anti-collapse before operation.
1) Hole collapse
During the injection process, if the mud level in the borehole casing suddenly rises and overflows the casing, then drops suddenly and bubbles appear, it should be suspected to be the sign of hole collapse, which can be detected by sounding hammer. If the sounding hammer was originally suspended on the concrete surface and is now buried and cannot be lifted up, or the sounding hammer cannot reach the original depth when detecting the concrete surface, with many differences, it can be confirmed that it is indeed a collapsed hole.
The cause analysis may be that the water leakage around the bottom of the casing, the water level in the hole decreases or in the tidal river, the water level difference in the hole decreases when the tide rises, the original hydrostatic pressure cannot be maintained, and the hole collapse can be caused by the stacking of heavy objects around the casing or the vibration of the machine.
After the collapse of the hole, the cause should be found out, and corresponding measures should be taken, such as maintaining or increasing the water head, removing heavy objects, eliminating vibration, etc., to prevent the hole from continuing to collapse, and then suck out the soil collapsed into the hole with a mud suction machine. If the hole does not continue to collapse, normal perfusion can be restored. If the hole collapse is not serious, it can be backfilled to the position above the hole collapse, and measures such as improving the mud performance, increasing the water head and burying the casing in depth can be taken to continue drilling. In case of serious hole collapse, the drilled hole shall be immediately backfilled with sand or small gravel with clay. After a period of suspension, the cause of hole collapse shall be found out and corresponding measures shall be taken to re-drill. When the hole collapse is not deep, the method of deep burying the casing can be adopted, and the soil around the casing can be tamped and re-drilled.
(2) Deflection of hole body
In case of hole body deflection and bending, the reason shall be analyzed and treated. Generally, the drill cone can be hung at the deviation position to sweep the hole repeatedly to make the hole upright; if the deviation is serious, backfill the cohesive soil to the deviation position, and then drill in after the deposition is dense.
(3) Reaming and shrinkage
In case of reaming and shrinkage, measures shall be taken to prevent hole collapse and excessive swing of drill cone. Shrinkage is caused by excessive wear of drill cone, untimely welding and repair, or soft soil and clay mudstone swelled by water in the stratum. For the former, timely welding and repair drill cone should be paid attention to, while for the latter, high-quality mud with low water loss rate should be used to protect the wall. When shrinkage has occurred, it is advisable to repeatedly sweep the hole up and down with a drill cone to enlarge the hole diameter.
(4) Paste drilling and burying drilling
Paste drilling and buried drilling often occur in rotary drilling and percussion drilling in the positive cycle (including submersible drilling rig). In this case, the mud consistency, the inlet and outlet of drilling slag, the inner diameter of drill pipe and the slag discharge equipment shall be checked and calculated, and the appropriate footage shall be controlled; if the drilling has been seriously burnt, the drilling shall be stopped to raise the drilling cone and remove the drilling slag.
Related News
Hot as "She" and Volga Piling Goddess Festival Staff Activities Review
In March of Yangchun, the breeze came slowly, and the "peach" died, burning its beauty, flowers all the way and elegance all the way. In this beautiful spring, the Volga sisters go outdoors together and always be the best of themselves. Happy Women's Day❤
2024-03-09
On the 15th of the first month, "the sweet and sticky tangyuan is full of happiness"
Eating glutinous rice balls is one of the traditional activities of the Lantern Festival
Tangyuan and "reunion" pronunciation similar
So take the meaning of reunion
The meaning of good luck and well-being
Hehe Meimei
The more prosperous the days passed
Lantern Festival Tuan Yuan Yuan Yuan
2024-02-24
You, are you ready for the new year? Volga Pilger's New Year's Eve Carnival
Whether it is calm or souvenir, 2023 will be the same as countless years in the past. In the countdown to the city lights, a brand-new 2024 will officially come on stage.
2024-02-10
On January 25, 2024, Wang Li, head of Xiangtan County, and Liu Xianlin, chairman of Baiyi Garden Enterprises, visited our company for a field visit, and the person in charge of our company actively received them. Wang Yuan, deputy general manager, and Zhao Lihong, deputy general manager of the manufacturing center, respectively introduced in detail the scale of the enterprise, the main products and the development of the rotary power drive device industry.
2024-01-27
On the afternoon of January 19, Hunan Volga Piling Machinery Equipment Co., Ltd. held a grand ceremony in the company's conference room for the quality work analysis and deployment with the goal of "improving customer satisfaction" and the signing ceremony of the quality responsibility certificate. The company's general manager Huang Jun, deputy general manager Wang Yuan, deputy general manager Zhao Lihong of the production and manufacturing center, design chief engineer Jin Zhou, etc., as well as the core management personnel of various departments, and front-line employees attended the ceremony.
2024-01-22
On the festive day of January 14, 2024, Hunan Volga Piling Machinery and equipment Co., Ltd. (hereinafter referred to as "Volga Piling") officially moved into Xiangtan Baiyi Intelligent equipment accessories Park, starting a new journey. it is also an important milestone in the development of Volga piling. In order to celebrate this historic moment, Volga General Manager Huang Jun and Deputy General Manager Wang Yuan led all employees to prepare and hold a grand housewarming celebration. In this warm and solemn occasion, we have witnessed the glorious moment of the company's development, and we are looking forward to a better tomorrow in the future. The upgrade of the new office space marks another solid step on the road of Volga Piling's continuous growth and development. It not only provides employees with a more comfortable and convenient working environment, but also provides a broader space for the company's business development and cooperation.
2024-01-16
Address: Building 4, Baiyi Intelligent Equipment Accessories Garden, Xiangtan, 1680 Tianyi Avenue, Yishuhe Town, Xiangtan City, Hunan Province
Address: Building 4, Baiyi Intelligent Equipment Accessories Garden, Xiangtan, 1680 Tianyi Avenue, Yishuhe Town, Xiangtan City, Hunan Province
Public QR Code
Sweep a visit
Mobile phone official website two-dimensional code
Copyright: Hunan Volga Piling Machinery Equipment Co., Ltd
Supports ipv4 ipv6 dual stack access
Business License